Publication: Design and characterization of a low voltage CMOS ASIC for medical instrumentation
Loading...
Identifiers
Publication date
2017-06
Defense date
2017-07-06
Authors
Tutors
Journal Title
Journal ISSN
Volume Title
Publisher
Impact
Export
Abstract
The acquisition of biomedical signals requires analogue to digital converters of high resolution, low voltage of power and low consumption. The solution for this need is the use of new sigma delta conversion architectures such as the one tested in this Bachelor Thesis.
This work covers the design of the instrumentation necessary for the operation of Application-Specific Integrated Circuit Sigma Delta Analog-to-Digital Converter (ASIC ADC) that is already manufactured and its integration into a Printed Circuit Board (PCB). It also includes the development of the necessary software that facilitates the accomplishment of the necessary tests and the analysis of the data that will allow to characterize the operation of the fabricated prototype. Finally, the results and conclusions of the project will be described.
The ASIC to be tested in this Bachelor Thesis consists of a180-nm Complementary Metal-Oxide Semiconductor (CMOS) bandpass ADC developed to fulfil the specifications of a fully-integrated receiver for Magnetic Resonance Imaging (MRI). Integrating an integrated CMOS receiver into a single chip will help improve image quality by avoiding the use of many coaxial cables that are used to connect the Radio Frequency (RF) coils to the scanning hardware. The proposal made is a very simple Low-IF receiver characteristics in which a continuous time Low-IF bandpass ADC is the most efficient architecture. The circuit in continuous time replaces the classic filter only thus, an anti-alias filter would be necessary. In addition, the bandpass filter assists in the attenuation of the quantization noise in the bandwidth of interest, while at the same time the stability of the system is easily achieved due to the selected Low-IF.
Description
Keywords
Biomedical signals, Complementary Metal-Oxide Semiconductor (CMOS), Medical instrumentation