Publication: Diseño de un eje motor ferroviario
Loading...
Identifiers
Publication date
2015-02
Defense date
2015-02-16
Authors
Advisors
Tutors
Journal Title
Journal ISSN
Volume Title
Publisher
Impact
Export
Abstract
En la primera parte del proyecto, a partir del plano de un eje motor del tren de alta velocidad AVE S103 de Renfe y sus características técnicas se ha comprobado que el eje cumple los requisitos de la norma EN 13104.
En la segunda parte, utilizando los valores de las cargas calculadas con la norma EN 13104 e implementando el eje en un programa de análisis mediante elementos finitos, en este caso ANSYS, se han calculado las tensiones en cada sección del eje y la vida a fatiga para las secciones críticas.
En la última parte del proyecto se incluye una comparación entre los resultados obtenidos con la norma EN 13104 y los obtenidos en ANSYS.
On the first part of this project, considering drawings and specifications of a motor axle included in the high speed train series, AVE S103 of Renfe, the design of the axle has been successfully checked within the requirements of the European standard EN 13104. On the second part, using the values of the forces calculated with the standard EN 13104, and implementing the axle into a finite element analysis program, in this case ANSYS, the stresses have been checked on every section of the axle and the fatigue life has been calculated for the critical sections. On the last part of the project a comparison between the results obtained with the standard EN 13104 and ANSYS has been performed.
On the first part of this project, considering drawings and specifications of a motor axle included in the high speed train series, AVE S103 of Renfe, the design of the axle has been successfully checked within the requirements of the European standard EN 13104. On the second part, using the values of the forces calculated with the standard EN 13104, and implementing the axle into a finite element analysis program, in this case ANSYS, the stresses have been checked on every section of the axle and the fatigue life has been calculated for the critical sections. On the last part of the project a comparison between the results obtained with the standard EN 13104 and ANSYS has been performed.
Description
Keywords
Eje motor ferroviario, Fatiga, Resistencia de materiales, Tren de alta velocidad, AVE S103