Power Losses Estimation in Low Voltage Smart Grids

dc.contributor.advisorAmarís Duarte, Hortensia Elena
dc.contributor.authorVelasco Rodríguez, José Ángel
dc.contributor.departamentoUC3M. Departamento de Ingeniería Eléctricaes
dc.contributor.tutorAmarís Duarte, Hortensia Elena
dc.descriptionMención Internacional en el título de doctores
dc.description.abstractOne of the European Union Targets was to replace at least 80% of all traditional energy meters with electronic smart meters by 2020. However, by the end of 2020, the European region (EU 27 including the UK) had installed no more than 150 million smart electricity meters, representing a penetration rate of 50% for smart meters. By 2026, It is expected that there will be more than 227 million smart meters in households due to the updated planning and target numbers, which will affect many European markets, including western and northern Europe. This scenario would contribute to the general purpose of building a more sustainable distribution system for the future. This thesis contributes to the field of power losses estimation and optimization in low-voltage (LV) smart grids in large-scale distribution areas. To contextualize the importance of the research, it has been necessary to explain the unbalanced nature of low voltage distribution networks where there is a huge deployment of smart meter rollout, and there is also uncertainty related to renewable energy generation. Main results of the thesis have been applied in two smart grid research projects: the national project OSIRIS (Optimizaci´on de la Supervisi´on Inteligente de la Red de Distribuci´on) and the European project IDE4L (Ideal Grid For All ). Smart metering infrastructure allows distributor system operators (DSOs) to have detailed information about the customers energy consumption or generation. Smart meters measure the active and reactive energy consumption/generation of customers using different discrete time resolutions which range from 15-60 min. A large-scale smart meter rollout allows service providers to gain information about the energy consumed and produced by each customer in near-real time. This knowledge can be used to compute the aggregated network power losses at any given time. In this case, network power losses are calculated by means of customers’ smart meters measurements, in terms of both active and reactive energy consumption, and by the energy measured by the smart meter supervisor located at the secondary substation (SS). The problem of network losses estimation becomes more challenging as a results of the existence of not-technical losses due to electricity fraud or smart meter measurements anomalous (null or extremely high) or even because there are customers’ smart meters that can be out of service. One of the differential keys of LV smart grids is the presence of single-phase loads and unbalanced operation, which makes it necessary to adopt a complete three-phase model of the LV distribution network to calculate the real value of the power losses. This scenario makes the process of power loss estimation a computationally intensive problem. The challenge is even greater when estimating the power losses of large-scale distribution networks, composed of thousands of SSs. In recent years, environmental concerns have led to the increasing integration of a considerable number of distributed energy resources (DERs) into LV smart grids. This fact prompts DSOs and regulators to provide the maximum energy efficiency in their networks (i.e., the smallest power loss values) and maximum sustainable energy consumption. Detailed understanding of the network’s behavior in terms of power losses and the use of electricity is necessary to achieve this energy efficiency. However, the above scenario presents some drawbacks. The integration of DERs units, such as photovoltaic (PV) panels, into distribution networks can produce an increment of network power losses if the DERs units are not optimally located, coordinated, or controlled. Additionally, the network can experience technical contingencies such as cable’s overloads and nodal over-voltages or can lead to an inefficient system operation due to high energy losses or cables that exceed thermal limits. Moreover, there is a great uncertainty associated with the distributed power generation from PVs because its energy generation depend on weather conditions, including ambient temperature and solar irradiance, which are highly intermittent and fluctuating. Uncertainty is also present in some loads with stochastic behavior, such as plug-in electric vehicles (PEV), which adds an uncertainty layer and makes their optimal integration more complex. Therefore, DSOs require advanced methods to estimate power losses in unbalanced large-scale LV smart grids under uncertain situations. Such estimations would facilitate the deployment of policies and practices that lead to a safe and efficient integration of DERs in the form of flexibility mechanisms. In this context, flexibility mechanisms are essential to achieve optimal operation conditions under extreme uncertainty. Flexibility mechanisms can be deployed to tackle the imbalance between generation and demand that results from the uncertainty that is latent in LV smart grids. These flexibility mechanisms are based on modifying the normal power consumption (for the demand side) or power generation (for the generation side), according to a flexibility scheduling at the request of the network operator. In summary, DSOs face the challenge of managing network losses over large geographical areas where there are hundreds of secondary substations and thousands of feeders, with multiple customers and an ever-increasing presence of renewable DERs. Power losses estimation is thus paramount to improve network energy efficiency in the context of the European Union energy policies. This situation is complicated by the unbalanced operation of those networks and the presence of uncertainty. To address these challenges, this thesis focuses on the following objectives: 1. Power losses estimation in unbalanced LV smart grids under uncertainty. 2. Power losses estimation in unbalanced LV smart grids in large areas with a presence of DERs. 3. Flexibility scheduling for power losses minimization in unbalanced smart grids under uncertainty. The mentioned objectives are achieved by taking advantage of smart metering infrastructures, machine and deep learning models and mathematical programming techniques which allows DSOs to reduce their total power losses within the distribution network. This approach entails using flexibility mechanisms to operate the distribution network optimally and enhance the load management and DG expansion planning. According to the objectives identified earlier, the main contributions of this thesis are the following: 1. Power losses estimation in unbalanced LV smart grids under uncertainty conditions. An optimization-based procedure to estimate load consumption of non-telemetered customers. A Markov chain-based process to estimate intra-hour load demand for data having a low resolution and for non-telemetered customers or customers which smart meters provide incorrect measurements. 2. Power losses estimation in unbalanced LV smart grids in large-scale areas with a presence of DERs. A data mining approach to reduce a high-dimensionality dataset in smart grids to yield a reduced set of relevant features. A clustering process to obtain representative feeders within a large-scale distribution area of smart grids. A deep learning-based power losses estimator for large-scale LV smart grids. The method is formulated as a deep neural network that uses as input features the power load demand and power generation of a set of representative feeders. The model gives, as output, the power losses of the whole area. 3. Flexibility scheduling for power losses minimization in unbalanced smart grids under uncertainty. A robust optimization model for the flexibility scheduling optimization model for unbalanced smart grids with distributed resources, such as PV panels and PEV devices.en
dc.description.degreePrograma de Doctorado en Ingeniería Eléctrica, Electrónica y Automática por la Universidad Carlos III de Madrides
dc.description.responsabilityPresidenta: Natalia Alguacil Conde.- Secretario: Pablo Ledesma Larrea.- Vocal: Samuele Grilloes
dc.rightsAtribución-NoComercial-SinDerivadas 3.0 España*
dc.rights.accessRightsopen accessen
dc.subject.ecienciaIngeniería Industriales
dc.subject.otherSmart gridsen
dc.subject.otherMachine learningen
dc.subject.otherDistribution systemsen
dc.subject.otherLow voltageen
dc.titlePower Losses Estimation in Low Voltage Smart Gridsen
dc.typedoctoral thesis*
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
4.48 MB
Adobe Portable Document Format