Nicolás Morillas, María deGordo Odériz, ElenaLlanes, L.2023-01-232023-01-232023-02de Nicolás-Morillas, M., Llanes, L. & Gordo, E. (2023). High-temperature wettability in hard materials: Comparison of systems with different binder/carbide phases and evaluation of C addition. International Journal of Refractory Metals and Hard Materials, 111, 106081.0263-4368https://hdl.handle.net/10016/36348Metal-ceramic wettability is a decisive parameter in the high-temperature sintering of hard materials. Wettability tests enable the study of this property with minimum material waste, especially useful in the search of alternative systems to WC-Co hardmetals. In this investigation, Fe-based binders – FeNiCr and FeCrAl – were tested on Ti(C,N) and WC substrates, aiming to assess: the high-temperature interactions, the dissolutive character of the liquid phase and the nature of the interphases generated, and the influence on sintering behaviour. As a result, FeNiCr led to excellent wetting scenarios for both ceramics, whereas FeCrAl alloys induced the formation of aluminium oxides. The effect of C addition on wettability was also evaluated, resulting in an improvement of this property by the inclusion of this element in the binder phase. Inspection of the microstructures resultant from powder metallurgy processing of the different configurations confirmed their excellent correlation with wettability results. As a consequence, the effectivity of this technique as a model of the sintering scenario could be asserted.17eng© 2022 The Authors.Atribución-NoComercial-SinDerivadas 3.0 EspañaAlternative hard materialsMetal-ceramic wettabilityContact-angle testsLiquid phase sinteringHigh-temperature sinteringPowder metallurgyresearch articleMaterialesQuímicahttps://doi.org/10.1016/j.ijrmhm.2022.106081open access110608117International Journal of Refractory Metals and Hard Materials111AR/0000031677