Soria Verdugo, AntonioVon Berg, LukasSerrano García, DanielHochenauer, ChristophScharler, RobertAnca-Couce, Andrés2021-05-132021-12-012019-12-01Soria-Verdugo, A., Von Berg, L., Serrano, D., Hochenauer, C., Scharler, R., and Anca-Couce, A. (2019). Effect of bed material density on the performance of steam gasification of biomass in bubbling fluidized beds. Fuel, 257, 116118.0016-2361https://hdl.handle.net/10016/32623Steam gasification of lignocellulosic biomass in a bubbling fluidized bed reactor was analyzed by means of the composition of the producer gas, including tars, and temperature distribution in the reactor. The catalytic and sorbent effect of sepiolite particles was studied by comparison of the tars generated with those produced in a bed of olivine, widely used in biomass gasification applications. Sepiolite has a lower particle density, which influences the forces acting on fuel and char particles and leads to a more homogeneous distribution of them in the dense bed during the gasification process. Fluidized beds of sepiolite particles contribute to increase the heating value of the producer gas and its hydrogen content compared to gasification under the same operating conditions in olivine beds. Furthermore, the tar yield is around 25% lower when gasifying in sepiolite beds, reducing the requirement of secondary methods for tars removal. Long-term gasification tests were also conducted in a sepiolite bed to evaluate the mitigation of the sorbent/catalytic effect of sepiolite with time.49 p.eng© 2019 ElsevierAtribución-NoComercial-SinDerivadas 3.0 EspañaBiomass steam gasificationFluidized bedOlivineSepioliteTarsresearch articleEnergías Renovableshttps://doi.org/10.1016/j.fuel.2019.116118open access116118Fuel257AR/0000024373