Pérez Díaz, José LuisGarcía Prada, Juan CarlosDíez Jiménez, EfrénValiente Blanco, IgnacioBerit, SanderLauri, TimmSanchez Garcia-Casarrubios, JuanSerrano, JavierRomera, FernandoArgelaguet-Vilaseca, HeribertGonzalez-De-Maria, David2024-02-022024-02-022012-03-01Pérez-Díaz, J.L., García-Prada, J.C., Díez-Jiménez, E., Valiente-Blanco, I., Sander, B., Timm, L., Sánchez-García-Casarrubios, J., Serrano, J., Romera, F., Argelaguet-Vilaseca, H., González-de-María, D.. Non-contact linear slider for cryogenic environment. In: Mechanism and Machine Theory 49, March 2012, Pages 308-314. https://doi.org/10.1016/j.mechmachtheory.2011.09.0020094-114Xhttps://hdl.handle.net/10016/39808A non-contact linear slider based on stable superconducting magnetic levitation with a long permanent magnet as a slider and two fixed superconducting disks which define the slide way has been designed, built and tested. The slider can be moved stably along a stroke of ± 11.5 mm by supplying a low current in a coil located at the end of the stroke while the levitation remains stable providing a reliable mechanism for linear displacement in a cryogenic environment. The response is linear with a sensitivity of 52 ± 2 mum/mA for displacements lower than 6 mm. Run out, pitch, yaw and roll have been measured demonstrating an overall good performance. In all cases the measured hysteresis was lower than 250 mum and the measured run out was also lower than 250 mum both for Y and Z axis. Roll and yaw were always below 300 murad, that is one order of magnitude lower than the pitch (4500 murad).7eng© 2011 Elsevier Ltd. All rights reserved.Atribución-NoComercial-SinDerivadas 3.0 EspañaMagneto-mechanismsCryo-mechanismsMagnetic levitationSliderNon-contact mechanismresearch articleIngeniería Mecánicahttps://doi.org/10.1016/j.mechmachtheory.2011.09.002open access308March314Mechanism and Machine Theory49AR/0000009418