Noviello, MicheleQuintero Alonso, AndrésPatón Álvarez, Susana2023-03-092023-03-092022-11-15AUSTROCHIP 2022: 30th Austrian Workshop on Microelectronics, October 11th, Villach, Austria [proceedings]. IEEE, cop. 2022. Pp. 57-60.978-1-6654-7309-5https://hdl.handle.net/10016/36801Proceeding of AUSTROCHIP 2022: 30th Austrian Workshop on Microelectronics, October 11th, Villach, Austria.MEMS microphones are usually DC biased with a voltage exceeding 10V and a large resistance, requiring a charge pump and a high-ohmic link between the ASIC and the MEMS. This DC biasing is needed to obtain enough sensitivity for medium to high quality microphones. This manuscript inves-tigates capacitance-controlled oscillators which allow to directly connect the MEMS sensor to the oscillator; this solution is prone to scaling. A new type of configuration (referred to as Cross-Connected Sensor) is presented and discussed. Its main advantage is the increase in the sensitivity and, when integrated in an ADC architecture, in the achievable SNR. The proposed solution is intended for Human-Machine Interface applications given their moderate SNR requirements.4eng©2022 IEEE.Micromechanical devicesSemiconductor device modelingResistanceSensitivityPower demandVoltageCapacitanceADCVoltage-controlled oscillatorsMEMS microphoneHMITime-encodingconference paperElectrónicahttps://doi.org/10.1109/Austrochip56145.2022.9940675open access5760AUSTROCHIP 2022: 30th Austrian Workshop on Microelectronics, October 11th, Villach, Austria.CC/0000033940