Jakubczak, PatrykDrozdziel, MagdaPodolak, PiotrPernas Sánchez, Jesús2022-11-222022-11-222021-10-01Jakubczak P, Droździel M, Podolak P, Pernas-Sánchez J. Experimental Investigation on the Low Velocity Impact Response of Fibre Foam Metal Laminates. Materials. 2021; 14(19):5510.1996-1944https://hdl.handle.net/10016/36078The combination of fibre metal laminates (FML) and sandwich structures can significantly increase the performance under impact of FMLs. The goal of this work was to create a material that will combine the superior properties of FMLs and foam sandwich structures in terms of the impact resistance and simultaneously have lower density and fewer disadvantages related to the manufacturing. An extensive impact testing campaign has been done using conventional fibre metal laminates (carbon- and glass-based) and in the proposed fibre foam metal laminates to assess and compare their behaviour. The main difference was observed in the energy absorption mechanisms. The dominant failure mechanism for fibre foam laminates is the formation of delaminations and matrix cracks while in the conventional fibre metal laminate the main failure mode is fibre cracking due to high local stress concentrations. The reduction in the fibre cracking leads to a better after-impact resistance of this type of structure improving the safety of the structures manufactured with these materials22eng© 2021 by the authors. Licensee MDPI, Basel, Switzerland.This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).Atribución 3.0 EspañaFibre metal laminatesFoam laminatesComposite failureImpactresearch articleMaterialeshttps://doi.org/10.3390/ma14195510open access5510 (1)195510 (22)Materials14AR/0000029461