RT Journal Article
T1 Role of stabilisers in the design of Ti aqueous suspensions for pressure slip casting
A1 Garcia Das Neves, Roberto
A1 Ferrari, Begoña
A1 Sánchez Herencia, Antonio Javier
A1 Pagnoux, C.
A1 Gordo Odériz, Elena
AB Colloidal processing has long been used in ceramics to achieve green bodies with high densities, complex shapes and homogeneous microstructures, but they are rarely used to shape metal powders because of their high density and high surface reactivity. However, the possibility of processing fine particles makes these techniques interesting for metals, such as titanium, with a low density and high melting point. This work presents encouraging results in the design of aqueous suspensions of Ti particles to be shaped into bulk pieces by pressure slip casting (PSC), which opens new paths for the processing of fine and complex microstructures. Ti powders, measuring 10 μm in size, and mixtures of Ti and Al₂O₃  powders (added up to 5 wt.%) were dispersed in water by the addition of different stabilisers. The influence of the stabilisers in the slurry behaviour (in terms of nature, stereochemistry and active functional groups) was determined, as well as the incorporation of ceramic particles. A polyacrylic-based dispersant was selected as the best stabiliser to incorporate a second component (Al₂O₃) into the Ti suspension, whereas shear-thinning additives, such as TIRON, are preferred for PSC shaping. Suspensions with 1 wt.% Al₂O₃ were selected for processing composites by PSC and sintering. Sintered materials were characterised by measuring the density, oxygen content, hardness and microstructure analysis by SEM. Ti bulk pieces with 97% density and fine and homogeneous microstructure, of which the relationship between the oxygen content and hardness agrees with that measured for CPTi grade 4 (249 ± 24 HV30), can be processed by PSC.
PB Elsevier
SN 0032-5910
YR 2014
FD 2014-09-01
LK https://hdl.handle.net/10016/20293
UL https://hdl.handle.net/10016/20293
LA eng
NO The authors would like to acknowledge the financial support from the Spanish Governmentthrough the projects MAT 2009-14448-C02-01 and 02, MAT2012 38650-C02-01 and 02 and tothe regional government of Madrid through the programme Estrumat (Ref. S2009/MAT-1585).
DS e-Archivo
RD 19 may. 2024