Manufacture of compression moulded PLA based biocomposites: A parametric study

e-Archivo Repository

Show simple item record

dc.contributor.author Rubio López, Ángel
dc.contributor.author Olmedo Marcos, Álvaro
dc.contributor.author Díaz Álvarez, Antonio
dc.contributor.author Santiuste Romero, Carlos
dc.date.accessioned 2020-12-15T11:38:37Z
dc.date.available 2020-12-15T11:38:37Z
dc.date.issued 2015-11-01
dc.identifier.bibliographicCitation Rubio-López, A., Olmedo, A., Díaz-Álvarez, A., & Santiuste, C. (2015). Manufacture of compression moulded PLA based biocomposites: A parametric study. Composite Structures, 131, 995-1000
dc.identifier.issn 0263-8223
dc.identifier.uri http://hdl.handle.net/10016/31599
dc.description.abstract In this study, an analysis of the fabrication parameters that influence on the strength of biodegradable composites is presented. The effect of heating temperature, pressure, number of plies, fibre, and matrix on the tensile strength was studied. Biodegradable composites were manufactured using film stacking and compression moulding process. The strengths of biocomposite based on two different polylactic acid (PLA) matrix, and reinforced with four different woven fibres of jute, flax and cotton were compared. The aim of this work is the development of an optimised manufacture process to reduce costs and production time of high strength biocomposites. As a result, a tensile strength higher than 100 MPa was obtained with a preheating time of 2 min and 3 min of heating under pressure. This result means a significant reduction of production time that can lead to reduce the manufacture cost of these materials. (C) 2015 Elsevier Ltd. All rights reserved.
dc.description.sponsorship Authors gratefully acknowledges the support of Spanish Ministry of Economy under the Project DPI2014-43994-R
dc.language.iso eng
dc.publisher Elsevier
dc.rights © 2015 Elsevier
dc.rights Atribución-NoComercial-SinDerivadas 3.0 España
dc.rights.uri http://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.title Manufacture of compression moulded PLA based biocomposites: A parametric study
dc.type article
dc.subject.eciencia Ingeniería Mecánica
dc.identifier.doi https://doi.org/10.1016/j.compstruct.2015.06.066
dc.rights.accessRights openAccess
dc.relation.projectID Gobierno de España. DPI2014-43994-R
dc.type.version acceptedVersion
dc.identifier.publicationfirstpage 995
dc.identifier.publicationlastpage 1000
dc.identifier.publicationtitle Composite Structures
dc.identifier.publicationvolume 131
dc.identifier.uxxi AR/0000017192
dc.contributor.funder Ministerio de Economía y Competitividad (España)
 Find Full text

Files in this item

*Click on file's image for preview. (Embargoed files's preview is not supported)


The following license files are associated with this item:

This item appears in the following Collection(s)

Show simple item record