Influence of special tool geometry in drilling woven CFRPs materials

e-Archivo Repository

Show simple item record

dc.contributor.author Feito Sánchez, Norberto
dc.contributor.author Díaz Álvarez, José
dc.contributor.author Cantero Guisández, José Luis
dc.contributor.author Miguélez Garrido, María Henar
dc.date.accessioned 2019-01-30T11:37:09Z
dc.date.available 2019-01-30T11:37:09Z
dc.date.issued 2015-07-22
dc.identifier.bibliographicCitation Cantero Guisandez, Jose Luis; Miguelez Garrido, Maria Henar; Feito Sanchez, Norberto; Diaz Alvarez, Jose (2015). Influence of special tool geometry in drilling woven CFRPs materials. Procedia engineering: 6th Manufacturing Engineering Society International Conference (MESIC 2015). : Elsevier B.V.. Pp. 632-638
dc.identifier.isbn 1877-7058
dc.identifier.uri http://hdl.handle.net/10016/27979
dc.description.abstract Machining processes of Carbon Fiber Reinforced Polymer (CFRP) are commonly required in order to achieve final assembly specifications. Despite the good mechanical properties of this kind of materials, they are hard to be machined due to the presence of hard particles; delamination, fiber pull-out and matrix thermal degradation are usually observed during its machining. Drilling operations are required before mechanical joining of the CFRP components. The actual interest in reducing delamination rests in the fact that it is the most serious damage found during drilling. In this work, a comparative study of three special geometries under different cutting conditions is presented. Thrust force and torque were monitoring during drilling tests and delamination extension was quantified. Results showed that a good drill tip geometry and feed rate selection is fundamental to reduce delamination damages.
dc.description.sponsorship The funding received from the Ministry of Economy and Competitiveness of Spain under the project DPI2011-25999 and FPI subprogram with the reference BES-2012-055162 is highly appreciated.
dc.format.extent 7
dc.format.mimetype application/pdf
dc.language.iso eng
dc.publisher Elsevier B.V.
dc.rights © 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license
dc.rights Atribución-NoComercial-SinDerivadas 3.0 España
dc.rights.uri http://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subject.other Drilling
dc.subject.other CFRP
dc.subject.other Woven delamination
dc.title Influence of special tool geometry in drilling woven CFRPs materials
dc.type conferenceObject
dc.subject.eciencia Ingeniería Mecánica
dc.rights.accessRights openAccess
dc.relation.projectID Gobierno de España. DPI2011-25999
dc.relation.projectID Gobierno de España. BES-2012-055162
dc.type.version publishedVersion
dc.relation.eventdate 2015-07-22
dc.relation.eventplace BARCELONA
dc.relation.eventtitle Manufacturing Engineering Society International Conference (MESIC 2015)
dc.identifier.publicationfirstpage 632
dc.identifier.publicationlastpage 638
dc.identifier.publicationtitle Procedia engineering: 6th Manufacturing Engineering Society International Conference (MESIC 2015)
dc.identifier.publicationvolume 132
dc.identifier.uxxi CC/0000024670
 Find Full text

Files in this item

*Click on file's image for preview. (Embargoed files's preview is not supported)


The following license files are associated with this item:

This item appears in the following Collection(s)

Show simple item record