Publication: Diseño de un explosor de esferas para aplicaciones de alta tensión
Loading...
Identifiers
Publication date
2014-09
Defense date
2014-10-09
Authors
Advisors
Tutors
Journal Title
Journal ISSN
Volume Title
Publisher
Impact
Export
Abstract
En el presente Trabajo Fin de Grado (TFG) se va a estudiar el fenómeno de ruptura dieléctrica en gases, concretamente en aire. Para ello se ha modelado un explosor de esferas sobre el cuál se han realizado una serie de ensayos para poder determinar la tensión crítica de ruptura dieléctrica del aire.
Tras describir los objetivos del TFG, se muestra una introducción en la cual se define el explosor de esferas, sus aplicaciones y se muestran conceptos básicos para poder desarrollar y entender el TFG.
Una vez realizada la introducción, se dedica un capítulo a los cálculos necesarios para el dimensionado del explosor de esferas acorde con los estándares internacionales y posteriormente se describen los ensayos realizados y analizan los datos obtenidos.
Finalmente se incluye el presupuesto y el cronograma donde se presentan las distintas fases y tiempo empleado en cada una de ellas, finalizando con las conclusiones obtenidas a la finalización de TFG.
This Final Degree Thesis will study the phenomenon of breakdown in gases, specifically in air. For this purpose, it will design a sphere gap in which there have been some test to determine the peak value of breakdown in air. After describe the aims of the Final Thesis, there is an introduction where is defined the sphere gaps, their uses and some basics notion about it which help to develop and to understand the Final Thesis. To continue, there is a chapter which includes the calculus needed for the design of the sphere gap according to with the international standard and the next chapter shows the test and the test results. At the end of this Final Thesis is shown the budget and the schedule where are described the different stages and the number of hours used in each, and terminated with the conclusions obtained at the end of the Final Thesis.
This Final Degree Thesis will study the phenomenon of breakdown in gases, specifically in air. For this purpose, it will design a sphere gap in which there have been some test to determine the peak value of breakdown in air. After describe the aims of the Final Thesis, there is an introduction where is defined the sphere gaps, their uses and some basics notion about it which help to develop and to understand the Final Thesis. To continue, there is a chapter which includes the calculus needed for the design of the sphere gap according to with the international standard and the next chapter shows the test and the test results. At the end of this Final Thesis is shown the budget and the schedule where are described the different stages and the number of hours used in each, and terminated with the conclusions obtained at the end of the Final Thesis.
Description
Keywords
Ruptura dieléctrica del aire, Explosor de esferas, Líneas eléctricas de alta tensión