Publication:
PCBN Performance in High Speed Finishing Turning of Inconel 718

dc.affiliation.areaUC3M. Área de Ingeniería Mecánicaes
dc.affiliation.dptoUC3M. Departamento de Ingeniería Mecánicaes
dc.affiliation.grupoinvUC3M. Grupo de Investigación: Tecnologías de Fabricación y Diseño de Componentes Mecánicos y Biomecánicoses
dc.contributor.authorDíaz Álvarez, José
dc.contributor.authorCriado del Álamo, Víctor
dc.contributor.authorMiguélez Garrido, María Henar
dc.contributor.authorCantero Guisández, José Luis
dc.contributor.funderMinisterio de Economía, Industria y Competitividad (España)es
dc.date.accessioned2019-02-08T10:18:45Z
dc.date.available2019-02-08T10:18:45Z
dc.date.issued2018-07-26
dc.description.abstractInconel 718 is a Ni superalloy widely used in high responsibility components requiring excellent mechanical properties at high temperature and elevated corrosion resistance. Inconel 718 is a difficult to cut material due to the elevated temperature generated during cutting, its low thermal conductivity, and the strong abrasive tool wear during cutting process. Finishing operations should ensure surface integrity of the component commonly requiring the use of hard metal tools with sharp tool edges and moderate cutting speeds. Polycrystalline cubic boron nitride (PCBN) tools recently developed an enhanced toughness suitable for these final operations. This paper focuses on the study of PCBN tools performance in finishing turning of Inconel 718. Several inserts representative of different manufacturers were tested and compared to a reference carbide tool. The evolution of tool wear, surface roughness, and cutting forces was analyzed and discussed. PCBN tools demonstrated their suitability for finishing operations, presenting reasonable removal rates and surface quality.en
dc.description.sponsorshipThis research was funded by Ministry of Economy, Industry and Competitiveness and FEDER program grant number DPI2014-56137-C2-2-R.en
dc.format.extent19
dc.format.mimetypeapplication/pdf
dc.identifier.bibliographicCitationDíaz-Álvarez, J.; Criado, V.; Miguélez, H.; Cantero, J.L. (2018). PCBN Performance in High Speed Finishing Turning of Inconel 718. Metals, 8 (8), 582.en
dc.identifier.doihttps://doi.org/10.3390/met8080582
dc.identifier.issn2075-4701
dc.identifier.publicationtitleMetalsen
dc.identifier.publicationvolume8
dc.identifier.urihttps://hdl.handle.net/10016/28026
dc.identifier.uxxiAR/0000022006
dc.language.isoengen
dc.publisherMDPIen
dc.relation.projectIDGobierno de España. DPI2014-56137-C2-2-Res
dc.rights© 2018 by the authors. Licensee MDPI, Basel, Switzerland.en
dc.rightsAtribución-NoComercial-SinDerivadas 3.0 España*
dc.rights.accessRightsopen accessen
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/*
dc.subject.ecienciaIngeniería Mecánicaes
dc.subject.otherInconel 718en
dc.subject.otherPCBN toolsen
dc.subject.otherFinishing turningen
dc.subject.otherTool wearen
dc.titlePCBN Performance in High Speed Finishing Turning of Inconel 718en
dc.typeresearch article*
dc.type.hasVersionVoR*
dspace.entity.typePublication
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
PCBN_metals_2018.pdf
Size:
921.05 KB
Format:
Adobe Portable Document Format