Publication:
PCBN Performance in High Speed Finishing Turning of Inconel 718

Loading...
Thumbnail Image
Identifiers
Publication date
2018-07-26
Defense date
Advisors
Tutors
Journal Title
Journal ISSN
Volume Title
Publisher
MDPI
Impact
Google Scholar
Export
Research Projects
Organizational Units
Journal Issue
Abstract
Inconel 718 is a Ni superalloy widely used in high responsibility components requiring excellent mechanical properties at high temperature and elevated corrosion resistance. Inconel 718 is a difficult to cut material due to the elevated temperature generated during cutting, its low thermal conductivity, and the strong abrasive tool wear during cutting process. Finishing operations should ensure surface integrity of the component commonly requiring the use of hard metal tools with sharp tool edges and moderate cutting speeds. Polycrystalline cubic boron nitride (PCBN) tools recently developed an enhanced toughness suitable for these final operations. This paper focuses on the study of PCBN tools performance in finishing turning of Inconel 718. Several inserts representative of different manufacturers were tested and compared to a reference carbide tool. The evolution of tool wear, surface roughness, and cutting forces was analyzed and discussed. PCBN tools demonstrated their suitability for finishing operations, presenting reasonable removal rates and surface quality.
Description
Keywords
Inconel 718, PCBN tools, Finishing turning, Tool wear
Bibliographic citation
Díaz-Álvarez, J.; Criado, V.; Miguélez, H.; Cantero, J.L. (2018). PCBN Performance in High Speed Finishing Turning of Inconel 718. Metals, 8 (8), 582.