Publication: Diseño del driver y calibración de un sensor óptico
Loading...
Identifiers
Publication date
2015-10
Defense date
2015-10-06
Authors
Advisors
Tutors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Este proyecto está basado en el diseño y montaje de un driver encargado de controlar
un láser. El objetivo principal del trabajo es que el driver permita ajustar la potencia
emitida (punto de trabajo). Por otro lado también debe permitir modular la potencia
emitida a partir de una señal de entrada en el rango de decenas de kiloherzios. Para ello
partimos de una amplitud de 3,3 V.
Por último, diseñar la PCB, utilizando la herramienta OrCad Capture para el diseño del
esquemático y OrCad Layout para el rutado y la creación de huellas.
This Project is based on the design and the assembly of a driver to responsible for controlling a laser. The main objective of this project is that the driver should be allowed to adjust the output power (operating point). On the other side, the driver should also make possible to adjust the output power from an input signal in the range of tens of KHz. We start with a 3.3 V amplitude. Finally, I should design the PCB using Orcad Capture to make the design and Orcad Layout to root the PCB and to create the footprints.
This Project is based on the design and the assembly of a driver to responsible for controlling a laser. The main objective of this project is that the driver should be allowed to adjust the output power (operating point). On the other side, the driver should also make possible to adjust the output power from an input signal in the range of tens of KHz. We start with a 3.3 V amplitude. Finally, I should design the PCB using Orcad Capture to make the design and Orcad Layout to root the PCB and to create the footprints.
Description
Keywords
Optoelectrónica, Control automático, Sensores ópticos, Driver