|
Archivo Abierto Institucional de la Universidad Carlos III de Madrid >
Investigación >
Departamentos >
Departamento de Ingeniería Mecánica >
FabDis. Grupo de Tecnologías de Fabricación y Diseño de Componentes Mecánicos y Biomecánicos >
DIM - FABDIS - Artículos de revistas >
Please use this identifier to cite or link to this item:
http://hdl.handle.net/10016/15359
|
| Title: | Machining FEM model of long fiber composites for aeronautical components |
| Author(s): | Santiuste, Carlos
Soldani, Xavier
Miguélez, Henar |
| Publisher: | Elsevier |
| Issued date: | Feb-2010 |
| Citation: | Composite Structures, 2010, 92(3), 691-698 |
| URI: | http://hdl.handle.net/10016/15359 |
| ISSN: | 0263-8223 |
| DOI: | 10.1016/j.compstruct.2009.09.021 |
| Abstract: | This work is focused on the study of orthogonal cutting of long fiber composites. A model based in finite element was developed. The mechanisms of chip formation of Glass and Carbon Fiber Reinforced Polymer (FRP) composites were analyzed. Significant differences were observed when comparing machining induced damage predicted with the model for both materials. While damage extended widely ahead the interface and beneath the tool tip in the case of GFRP, damage was located in a much smaller zone in the case CFRP. The fiber orientation influences both the mechanism of chip formation and the induced subsurface damage. |
| Sponsor: | The authors are indebted for the financial support of this work, to the Ministry of Science and Education of Spain (under Project DPI2008-06746). The authors also acknowledge to the CAMUC3 M for the financial support obtained for this work with the Project CCG08-UC3 M/DPI-4494. |
| Publisher version: | http://dx.doi.org/10.1016/j.compstruct.2009.09.021 |
| Keywords: | Machining induced damage
Aeronautical components
Orthogonal cutting
LFRP composite |
| Rights: | © Elsevier |
| Appears in Collections: | DIM - FABDIS - Artículos de revistas
|
Items in E-Archivo are protected by copyright, with all rights reserved, unless otherwise indicated.
|
